Technical Information pavers

Technical Information Pavers – Brick Paver Testing Report by Stone Initiatives

Technical Information Pavers – Testing to determine the breaking load and slip resistance of two samples of Brick Pavers, Old Red 50mm and Mahogany 50mm.

Characteristic breaking load of segmental pavers was carried out in accordance with AS4456.5:2003. The specimens were air dried at 20±2˚C for a minimum of 48 hours prior to testing. Testing was carried out with the wearing face in tension

technical - brick and paver testingCLICK TO DOWNLOAD

The following specifications and technical manuals are also available for you to download.

DISCLAIMER:
These publications copyright of Think Brick Australia. They are reproduced here by permission.
While the contents of these publication are believed to be accurate and complete, the information given is intended for general guidance.  This information does not replace the services of professional advisers on specific projects.
Local or state regulations may require variation from the practices and recommendations contained in these publications.
Littlehampton Clay Bricks and Pavers disclaims any liability whatsoever regarding the contents of these publications.
Technical Information pavers.